Passive solar design
refers to using the solar energy to heat the interior spaces of a building
without relying on mechanical devices that require additional energy. Passive solar system rely on the natural heat
transfer processes of conduction, convection and radiation for the collection,
storage, distribution and control of solar energy. Here, windows, walls, and
floors are made to collect, store, and distribute solar energy in the
form of heat in the winter and reject solar heat in the summer. This is called
passive solar design or climatic design because, unlike active solar
heating systems, it doesn't involve the use of mechanical and electrical
devices.
Conduction is the
transfer of heat between substances that are in direct contact with each other.
The better the conductor the more rapidly the heat will transfer. Good
conductor are copper, iron, steel etc. Poor conductors are wood, paper, air etc.
Convection
is the primary method by which heat moves through the gases and liquid in up
and down movement with the heat transfer. As the gas is heated it warms,
expands, rises because it is less dense. When the gas or liquid cools it
becomes denser and falls. As the gas or liquids warmer and rise or cools and
falls it creates a convection current
Radiation are the
electromagnetic waves that travel through the empty space. The sun warms the
earth through radiation of electromagnetic waves.
Based on the
relationship with sun, the interior space and the heat collection system there
are three types of passive solar heating.
1)Direct gain
2)Indirect gain
3)Isolated gain
1) Direct gain
Direct Gain System is
a type of passive solar heating system in which south-facing windows provide
heat gain during the daytime and high-mass thermal-storage materials absorb and
store that heat. At night, the stored heat radiates back out, warming the space.
This is the simplest type of passive solar heating system, but careful design
is required to prevent overheating.
Direct gain attempts to
control the amount of direct solar radiation reaching the living
space. This direct solar gain is a critical part of passive solar house
designation as it imparts to a direct gain. The cost
effectiveness of these configurations are currently being investigated in great
detail and are demonstrating promising results.
2) Indirect gain
Indirect gain systems control heat gain at the exterior skin of
a building. It is of three types:-
i. Trombe wall
ii.Sun space
iii.Roof pond
i.Trombe
Wall
A Trombe wall is a system which consists
of a dark coloured
wall of high thermal mass facing the sun, with glazing spaced in
front to leave a small air space. The glazing traps solar radiation like a
small greenhouse.
The solar radiation first strikes the trombe wall located between the sun and
the living space. The sun absorbed solar energy moves through the wall by
conduction and then to the space by radiation and convection.
ii.Sun space
A
‘Sun space’ is usually a south-facing glazed area located outside of the main
fabric envelope of the building. The space naturally heats and cools allowing
daytime temperatures to
raise higher and night time temperatures to fall further than
the ‘comfort zone’ temperatures of the
adjoining living space.
This sun space having a floor of a high thermal mass
by a thermal storage wall from which the heat is drawn as needed. For cooling the sun space can be vented to the exterior.
iii.Roof
Pond
This
is another form of indirect gain system that serves as a liquid mass for
absorbing and storing solar energy and insulation panel is moved over the roof
pond at night along the stored heat to radiate downward into the space. At
night, the insulation is removed and the water exposed, losing significant
amount of heat by radiation to the night sky. Early in the morning, the
insulation panels are replaced to protect the water from the heat of the day
and solar radiation. The water remains relatively cool throughout the day,
cooling the ceiling of the space below. A cool ceiling is particularly
effective in rooms where heat is being generated as warm air always rises to
the top, to lose its heat almost immediately to the ceiling. The water is
typically contained in black bags or dark coloured
containers to maximize radiant emissions and minimize evaporation.
3)
Isolated gain
Isolated gain
involves utilizing solar energy to passively move heat from or to the living
space using a fluid, such as water or air by natural convection or
forced convection. Heat gain can occur through a
sun space, solarium or solar closet. These areas may also be employed
usefully as a greenhouse or drying cabinet. An equator-side sun room may have
its exterior windows higher than the windows between the sun room and the
interior living space, to allow the low winter sun to penetrate to the cold
side of adjacent rooms. Glass placement and overhangs prevent solar gain during
the summer. Earth cooling tubes
or other passive
cooling techniques can keep a solarium cool in the summer.